chanpin

Ngwaahịa anyị

HLM Vertical Roller Mill

Igwe igwe kwụ ọtọ HLM bụ akụrụngwa na-eme ntụ ntụ dị elu nke emere dabere na teknụzụ dị elu nke ụwa site n'aka Guilin Hongcheng.Igwe igwe igwe kwụ ọtọ bụ ngwa igwe ọka pụrụ iche na-ejikọta ntụ ọka, ihicha na nhazi, na ibuga n'otu nkeji.HLM usoro vetikal igwe igwe igwe nwere uru nke elu egweri arụmọrụ, ala oriri, ibu nri size, mfe nke fineness ukpụhọde, ala ọrụ na-eri, ohere ịzọpụta, ala mkpọtụ, eyi-eguzogide, gburugburu ebe obibi nchebe, na wdg Nke a vetikal igwe igwe igwe igwe. a na-etinye ya n'ọrụ ọkụ eletrik, metallurgy, kemịkalụ na ụlọ ọrụ ndị na-abụghị ọla, dị ka simenti Portland na simenti agwakọta, limestone, slag, manganese, gypsum, coal, barite, calcite wdg HLM igwe igwe kwụ ọtọ egosila na ọ bụ ngwá ọrụ na-egweri ngwa ngwa. nke na-egosipụta ọtụtụ uru karịa igwe igwe bọọlụ ọdịnala, ọ dịkwa ngwa ngwa ịwụnye karịa igwe igwe bọọlụ ọdịnala, na-ebelata ọnụ ahịa mbụ.

Ọ bụrụ na ịchọrọ ịzụta igwe igwe kwụ ọtọ, biko pịa Kpọtụrụ UGBUA n'okpuru.

Ọ ga-amasị anyị ịkwado gị ụdị igwe igwe igwe ihe kacha mma iji hụ na ị nwetara nsonaazụ egweri achọrọ.Biko gwa anyị ajụjụ ndị a:

1.Your raw material?

2. Achọrọ mma (ntupu / μm)?

3. Achọrọ ikike (t / h)?

  • Nha nri kacha elu:50mm
  • Ike:10-150t/h
  • ịdị mma:200-325 ntupu (75-44μm)

oru oke

HLM Vertical Roller Mill Series (ụlọ ọrụ kemịkalụ)

Nlereanya Dayameta etiti okpokoro egweri (mm) Ike (t/h) Nha nri (mm) Mmiri mmiri ngwaahịa ịdị mma (10-40 μm) Mmiri ntụ ntụ ikpeazụ(%) Ike (kw)
HLM10/2X 800 1-3 0-15 <5% <97% ≤1 55
HLM16/2X 1250 2-7 0-20 <5% <97% ≤1 132
HLM17/2X 1300 3-12 0-25 <5% <97% ≤1 180
HLM19/2X 1500 4-16 0-35 <5% <97% ≤1 250
HLM21/2X 1700 6-24 0-35 <5% <97% ≤1 355
HLM21/3X 1750 7-27 0-35 <5% <97% ≤1 400
HLM24/2X 1900 7-28 0-35 <5% <97% ≤1 450
HLM29/3X 2400 9-35 0-40 <5% <97% ≤1 560
HLM29/4X 2400 10-39 0-40 <5% <97% ≤1 630
HLM30/2X 2800 11-45 0-50 <5% <97% ≤1 710

Cheta na: Raw Material egweri index≤18kWh/t.

 

HLM Vetikal Roller Mill Maka Simenti siri ike

Nlereanya Dayameta etiti okpokoro egweri (mm) Ike (t/h) Mmiri mmiri ngwaahịa Ịdị mma Ike (kw)
HLM30/2 2500 85-100 <10%

R0.008 <12%

800/900
HLM34/3 2800 130-160 <10% 1120/1250
HLM42/4 3400 190-240 <10% 1800/2000
HLM44/4 3700 190-240 <10% 2500/2800
HLM50/4 4200 240-300 <10% 3150/3350
HLM53/4 4500 320-400 <10% 3800/4200
HLM56/4 4800 400-500 <10% 4200/4500
HLM60/4 5100 550-670 <10% 5000/5400
HLM65/6 5600 600-730 <10% 5600/6000

Mara: Raw ihe egweri ọnụego≤13kWh/t.

 

HLM Vertical Roller Mill maka Clinker

Nlereanya Dayameta etiti okpokoro egweri (mm) Ike (t/h) Mmiri mmiri ngwaahịa Mpaghara elu akọwapụtara Ike (kw)
HLM24/2P 1900 35-45 ≤2%

220-260m2/kg(R0.08≤15%)

560
HLM26/2P 2000 42-55 ≤2% 630
HLM30/2P 2500 60-75 ≤2% 900
HLM34/3P 2800 90-110 <≤2% 1400
HLM35/3P 2800 130-160 ≤2% 2000
HLM42/4P 3400 160-200 ≤2% 2500
HLM44/4P 3700 190-240 ≤2% 3000
HLM45/4P 3700 240-300 ≤2% 3800
HLM53/4P 4500 300-380 ≤2% 4800
HLM56/4P 4800 330-420 ≤2% 5300

Mara: Raw ihe egweri ọnụego≤18kWh/t.

 

HLM Vertical Roller Mill maka Slag

Nlereanya Dayameta etiti okpokoro egweri (mm) Ike (t/h) Mmiri mmiri ngwaahịa Mpaghara elu akọwapụtara Ike (kw)
HLM26/S 2000 15-18 <15%

≥420m2/ n'arọ

560
HLM30/2S 2500 23-26 <15% 900
HLM34/3S 2800 50-60 <15% 1800
HLM42/4S 3400 70-83 <15% 2500
HLM44/4S 3700 90-110 <15% 3350
HLM50/4S 4200 110-140 <15% 3800
HLM53/4S 4500 130-150 <15% 4500
HLM56/4S 4800 150-180 <15% 5300
HLM60/4S 5100 180-200 <15% 6100
HLM65/6S 5600 200-220 <15% 6450/6700

Mara: Raw Material egweri index≤25kWh/t.Ọnụego egweri ihe eji eme ihe ≤30kWh/t.

 

HLM Vetikal Mill maka Carbon

Nlereanya Dayameta etiti okpokoro egweri (mm) Ike (t/h) Mmiri mmiri ngwaahịa Carbon ntụ ntụ mma Ike (kw)
HLM10/2M 800 3-5 <15%

R0.08=10%-15%

45/55
HLM14/2M 1100 7-10 <15% 90/110
HLM16/2M 1250 9-12 <15% 110/132
HLM17/2M 1300 13-17 <15% 160/185
HLM18/2M 1300 14-19 <15% 185/250
HLM19/2M 1400 18-24 <15% 220/250
HLM21/2M 1700 23-30 <15% 280/315
HLM24/2M 1900 29-37 <15% 355/400

 

Nlereanya Dayameta etiti okpokoro egweri (mm) Ike (t/h) Mmiri mmiri ngwaahịa Carbon ntụ ntụ mma Ike (kw)
HLM28/2M 2200 36-45 <15%

R0.08=10%-15%

450/500
HLM29/2M 2400 45-56 <15% 560/630
HLM30/2M 2500 45-56 <15% 710/800
HLM34/3M 2800 45-56 <15% 900/1120
HLM42/4M 3400 45-56 <15% 1400/1600
HLM45/4M 3700 45-56 <15% 1800/2000
HLM50/4M 4200 45-56 <15% 2500/2800
HLM56/4M 4800 45-56 <15% 3150/3500

Mara: Carbon hardgrove grind index 50 ~ 70

Nhazi
ihe

Ngwa ndị ọdabara

Guilin HongCheng igwe igwe na-egweri dị mma maka ịkụ ihe dị iche iche na-abụghị ọla na ike Mohs n'okpuru 7 na mmiri dị n'okpuru 6%, enwere ike gbanwee fineness ikpeazụ n'etiti 60-2500mesh.Ngwa ndị dị ka marble, limestone, calcite, feldspar, carbon arụ ọrụ, barite, fluorite, gypsum, ụrọ, graphite, kaolin, wollastonite, quicklime, manganese ore, bentonite, talc, asbestos, mica, clinker, feldspar, quartz, ceramics, bauxite, wdg. Biko kpọtụrụ anyị maka nkọwa.

  • calcium carbonate

    calcium carbonate

  • dolomite

    dolomite

  • limestone

    nkume nzu

  • marble

    mabul

  • talc

    talc

  • Uru nka

    The final product has stable quality. Short dwell time of the material to be ground can ensure even particle shape and excellent fluidity. The few iron content is easy to remove to guarantee high whiteness and purity.

    Ngwaahịa ikpeazụ nwere mma kwụsiri ike.Short ibi oge nke ihe ga-ala nwere ike hụ na ọbụna urughuru udi na magburu onwe fluidity.Ọdịnaya igwe ole na ole dị mfe iwepu iji kwe nkwa ịdị ọcha dị elu na ịdị ọcha.

    Higher grinding efficiency, lower energy consumption. The power consumption is 40% -50% lower than ball mill. The single unit has high throughput, and can use valley electricity.

    Elu egweri arụmọrụ, ala ike oriri.Oriri ike bụ 40% -50% ala karịa igwe igwe bọọlụ.Otu unit nwere nnukwu mmepụta ihe, ma nwee ike iji ọkụ eletrik na ndagwurugwu.

    Environmental Protection. The whole system of the HLM vertical roller mill has low vibration and low noise, it is sealed and operated under negative pressure, no spillage of dust, and can basically realize dust-free workshop.

    Nchekwa gburugburu ebe obibi.Usoro dum nke igwe igwe kwụ ọtọ nke HLM nwere obere mkpọtụ na mkpọtụ dị ala, a na-emechi ya ma rụọ ọrụ n'okpuru nrụgide na-adịghị mma, enweghị mkpofu uzuzu, ma nwee ike ịghọta ogbako na-enweghị uzuzu.

    Ease of maintenance, lower operating cost. The grinding roller can be taken out from the machine through the hydraulic device, a large space for maintenance. Both the two sides of the roller shell can be used for a longer working life. The mill can run without raw material on the grinding table, which erases the difficulty in starting.

    Mfe nke mmezi, ọnụ ala ọrụ dị ala.Enwere ike wepụ igwe na-egweri na igwe site na ngwaọrụ hydraulic, nnukwu ohere maka mmezi.Enwere ike iji akụkụ abụọ nke shea rola mee ogologo ndụ na-arụ ọrụ.Igwe igwe igwe nwere ike ịgba ọsọ na-enweghị akụrụngwa na tebụl egweri, nke na-ehichapụ ihe isi ike ịmalite.

    Rollers with height-controlled device, which could avoid strong vibration that caused due to short of material on the table. Newly-designed roller sealing component ensures the reliable sealing without sealing the blower, which can lower the oxygen content in the mill to prevent the possibility of explosion.

    Rollers nwere ngwaọrụ na-achịkwa elu, nke nwere ike izere ịma jijiji siri ike nke kpatara n'ihi ụkọ ihe dị na tebụl.Ihe mkpuchi mkpuchi mkpuchi nke a na-emepụta ọhụrụ na-eme ka akara a pụrụ ịdabere na ya na-enweghị akara nke ikuku, nke nwere ike belata ọdịnaya oxygen na igwe igwe iji gbochie ohere nke mgbawa.

    The mill integrates crushing, drying, grinding, classifying and conveying materials in one continuous, automated operation. Compact layout requires less footprint which is 50% of the ball mill. It can be installed in outdoors, lower construction cost can save initial investment.

    Igwe ihe igwe na-ejikọta nchicha, ihicha, ichicha, nhazi na ibufe ihe n'otu ọrụ na-aga n'ihu na-akpaghị aka.Nhazi kọmpat chọrọ obere akara ukwu nke bụ 50% nke igwe igwe bọọlụ.Enwere ike itinye ya n'èzí, ọnụ ahịa ihe owuwu dị ala nwere ike ịchekwa ego mbụ.

    High degree of automation. It adopts the PLC automatic control system and can realize remote control, ease of operation and maintenance, labor costs saving.

    Ogo dị elu nke akpaaka.Ọ na-anabata sistemu njikwa akpaaka PLC ma nwee ike ịghọta njikwa anya, ịdị mfe nke ịrụ ọrụ na mmezi, ịchekwa ụgwọ ọrụ.

    features high drying ability with hot air direct contact with the material in the mill, maximal feeding moisture is up to 15%. A separate drying machine and energy for the mill system can be both saved. The vertical mill can satisfy the materials in different moisture by adjusting the hot air temperature.

    atụmatụ dị elu ike ihicha na ikuku na-ekpo ọkụ kpọmkwem kọntaktị na ihe dị na igwe igwe, nri nri kachasị elu ruru 15%.Enwere ike ịchekwa igwe ihicha dị iche na ike maka igwe igwe.Igwe igwe kwụ ọtọ nwere ike imeju ihe ndị dị na mmiri dị iche iche site n'ịgbanwe okpomọkụ ikuku dị ọkụ.

    Ikpe ngwaahịa

    Ezubere ma wuo ya maka ndị ọkachamara

    • Enweghị nkwekọrịta na mma
    • Ihe owuwu siri ike ma na-adịgide adịgide
    • Ngwa nke kacha mma
    • Igwe anaghị agba nchara siri ike, aluminom
    • Mmepe na nkwalite na-aga n'ihu
    • HLM vertical grinding machine
    • HLM vertical grinding mill
    • HLM vertical mill machine
    • HLM vertical mill manufacturer
    • HLM Steel slag vertical mill
    • HLM vertical roller mill
    • HLM vertical roller mill machine
    • HLM Vertical Roller Mill

    Ọdịdị na ụkpụrụ

    Ka igwe igwe kwụ ọtọ na-arụ ọrụ, moto na-ebugharị ihe nbelata ka ọ tụgharịa ọkpụkpọ ahụ, a na-ebuga akụrụngwa n'etiti etiti ọkpụkpọ ahụ site na nri mkpuchi ikuku rotary.Ihe na-aga n'ihu na nsọtụ nke ọkpụkpọ n'ihi mmetụta nke ike centrifugal na karịa ịbụ ala site na ike nke roller ma na-akpụgharị site na ịpịa, na-egweri na ịkpụ.N'otu oge ahụ, ikuku na-ekpo ọkụ na-agbapụ gburugburu ọkpụkpọ ahụ ma na-agagharị ihe ala.Ikuku na-ekpo ọkụ ga-ehichapụ ihe na-ese n'elu mmiri ma feghachi ihe ahụ na-adịghị ahụkebe na ọkpụkpọ.A ga-ebute ntụ ntụ dị mma na classifier, ntụ ntụ tozuru oke ga-esi na igwe igwe ahụ wee kpokọta ya site na onye na-anakọta uzuzu, ebe ntụ ntụ ga-adaba na ọkpụkpọ site na agụba classifier wee gbanye ọzọ.Nke a okirikiri bụ dum usoro egweri.

    HLM Structure 1

    Igwe igwe igwe kwụ ọtọ HLM na-eji modul ọkọlọtọ iji chepụta na imepụta ngwaọrụ nrụgide.Ka ikike na-abawanye, ọnụọgụ roller ga-abawanye (anyị nwere ike iji 2, 3 ma ọ bụ 4, kacha 6 rollers) na permutation kwesịrị ekwesị na nchikota iji tọọ usoro dị iche iche nke akụrụngwa nwere ikike dị iche iche site na akụkụ kacha nta nke ọkọlọtọ iji mezuo ihe achọrọ nke ihe dị iche iche, fineness na mmepụta.

    HLM Structure 2

    Sistemụ mkpokọta uzuzu pụrụ iche I

    Unique Dust Collection System I

    Sistemụ mkpokọta uzuzu otu II

    Single dust collection system II

    Usoro nchịkọta uzuzu nke abụọ

    Secondary dust collection system

    Ọ ga-amasị anyị ịkwado gị ụdị igwe igwe igwe ihe kacha mma iji hụ na ị nwetara nsonaazụ egweri achọrọ.Biko gwa anyị ajụjụ ndị a:
    1.Your raw material?
    2. Achọrọ mma (ntupu / μm)?
    3. Achọrọ ikike (t / h)?